Spray Painting Your Car With Aerosol Spray Cans - Bodywork
Some people will suggest to you that using aerosol spray paint to paint your car is not exactly a good choice. Its true that you are not likely to get that car manufacturers perfect finish on it, but you still could get various nice results. The essential thing is that you purchase a good quality paint, and most important you apply it correctly. There're some techniques to utilising aerosol spray paints. They're not hard to learn and are well worth the effort.
Firstly you will need to determine if youre just touching up a specified area on your car, or if youre going to re paint the whole vehicle. If you're doing a touchup then you are going to have to pay very close attention to color matching, where as in a complete paint job this isnt rather as important.
Assuming youre going to be doing a touchup you will need a few items. You would need a couple of repair items such as sand paper, putty and a knife. Say the area youre working on is rough or chipped you'll need to sand it down smooth. Say there're pit marks you would have to fill them with the putty then smooth this out.
You will need a good car wash detergent, and degreaser, even if you're doing merely a touch up, it must be utterly clean.
You'll need a couple of paper and masking tape. Take the time to be diligent about covering different regions that could possibly be in the line of fire when youre apply your aerosol spay paint. Even a very light breeze can cause a over spray onto your chrome, windows, etc.
You got to choose your primer, color and finish aerosol spray paints. Be certain to do a color test by doing a very average area first. And then you'll be able to continue.
Test a couple of sprays on some cardboard first to be sure you don't get whatever squirts or blobs, and the paint is spraying evenly. Dont forget to shake the can for at least 2 or three minutes so it is well mixed, or you won't get an even colour.
Keep the spray moving as you press down on the nozzle. Do not hold it in one spot or you'll get runs. It is much better to use a couple of really light coats, then one or 2 heavy ones. If you apply it too thick its going to be very uneven and extremely obvious. It may seem like this is really time consuming, but not nearly as much as it'll be if you've to re-sand the paint off and start again.
Shake the can of aerosol spray paint every couple of minutes in order to keep it well distributed.
Your primer and your top coat must be utilised with as much care as your color is. With the correct application of your aerosol spray paint, your car could end up really awesome looking, and all of the work you put into it will have been well worth it. - 21396
Firstly you will need to determine if youre just touching up a specified area on your car, or if youre going to re paint the whole vehicle. If you're doing a touchup then you are going to have to pay very close attention to color matching, where as in a complete paint job this isnt rather as important.
Assuming youre going to be doing a touchup you will need a few items. You would need a couple of repair items such as sand paper, putty and a knife. Say the area youre working on is rough or chipped you'll need to sand it down smooth. Say there're pit marks you would have to fill them with the putty then smooth this out.
You will need a good car wash detergent, and degreaser, even if you're doing merely a touch up, it must be utterly clean.
You'll need a couple of paper and masking tape. Take the time to be diligent about covering different regions that could possibly be in the line of fire when youre apply your aerosol spay paint. Even a very light breeze can cause a over spray onto your chrome, windows, etc.
You got to choose your primer, color and finish aerosol spray paints. Be certain to do a color test by doing a very average area first. And then you'll be able to continue.
Test a couple of sprays on some cardboard first to be sure you don't get whatever squirts or blobs, and the paint is spraying evenly. Dont forget to shake the can for at least 2 or three minutes so it is well mixed, or you won't get an even colour.
Keep the spray moving as you press down on the nozzle. Do not hold it in one spot or you'll get runs. It is much better to use a couple of really light coats, then one or 2 heavy ones. If you apply it too thick its going to be very uneven and extremely obvious. It may seem like this is really time consuming, but not nearly as much as it'll be if you've to re-sand the paint off and start again.
Shake the can of aerosol spray paint every couple of minutes in order to keep it well distributed.
Your primer and your top coat must be utilised with as much care as your color is. With the correct application of your aerosol spray paint, your car could end up really awesome looking, and all of the work you put into it will have been well worth it. - 21396
About the Author:
Announcing: The first do-it-yourself spray painting and bodywork course that guarantees you results or your money back. Learn how to spray paint cars with SprayPaintSecrets 2 DVD Course.
posted by X - Men @ 3:43 AM
0 Comments
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home